Mini olive-press with grinding stones
Designed for traditional cold pressing.
Specifications
- Grinders natural granite diameter: 40 cm thickness 4 cm
- Engine: 0,75 kw
- Total diameter: cm 55
- Weight: kg 110
- Processing capacity: 10-15 Kg per cycle
Suitable for small productions, it allows an entirely cold processing in order to produce authentic olive oil and to enhance the features of the olives, as is typical of hand-crafted processing with the traditional system of pressure squeezing and oil separation by decantation, when possible. In the first phase, the olives are ground at low speed for a time of 10/15 minutes according to the type of olives.
The olive paste thus obtained must be stretched on the filtering disks (disks of stainless steel mesh or fabric) which will be stacked and placed under the hand-operated press in order to be pressed.
Hydraulic hand press
Designed for traditional cold pressing.
Specifications
- Manual mode: 20 tons
- Included: No. 1 series of filtering disks d. 33 cm, stainless steel and iron
- Weight: kg 153
- Overall dimensions: cm 80x70x185h
- Hand application of olive paste on the filtering disks with spatula
- Oil separation by decantation
- Time for a complete processing cycle of crushing and pressing 1.5 hours
Suitable for small productions, combined to the mini olive-press with grinding stones, it allows the pressing of the olive paste produced by the olive-press and suitably stretched on the FISCOLI, featuring an entirely cold processing in order to produce authentic olive oil and to enhance the features of the olives. The product thus obtained is left to settle when the characteristics of the olives allows it, in order to obtain the separation of the oil from the vegetation water.
The oil thus obtained can be collected and possibly filtered, bottled and ready to use.
Oil press (NS Mod.)
Designed for the continuous squeezing of seeds and oily fruits in general.
Specifications
- Average processing capacity: 2-3 Kg/hour depending on seed variety and setting
- Screw: diameter 38 mm
- Rotations/min of the screw: fixed or variable on request
- Engine: three-phase 0.75 Kw with single-phase power supply 220 V 50 Hz
- Machine weight: Kg 35
- Overall dimensions: cm 60x38x42h
This machine is designed for pressing continuously seeds and oily fruits in general, properly dried, such as sunflower, canola, flax, walnuts, peanuts, etc … and many others by using the appropriate specific accessories. The action takes place by means of the rotation of the screw which compresses the seed towards the exit hole of the headboard, suitably heated by an electrical resistance, which is transformed into pellets and by separating the oil from the compression chamber in the central area.
The machine is equipped according to the characteristics of the seed to be processed.
Hand-operated press for oil (Piteba Mod.)
Designed for pressing seeds and properly dried oily fruits
Specifications
- Operation: hand-operated by crank handle
- Average processing capacity: 1Kg/hour depending on the speed of rotation of the screw
- Machine weight: Kg 2,300
This machine is designed for pressing oily seeds and properly dried fruits. The action takes place by means of the rotation of the screw which compresses the seed towards the exit hole of the headboard, suitably heated with a small flame fueled by alcohol or the like, which is transformed into pellets and oil.
Is not optimal for the processing of small seeds or for seeds with little oil content.
